54 lines
1.6 KiB
Plaintext
54 lines
1.6 KiB
Plaintext
* Omnivision os08a10 MIPI CSI-2 sensor
|
|
|
|
Required Properties:
|
|
- compatible: should be "ovti,os08a10"
|
|
- clocks: reference to the 24M xvclk input clock.
|
|
- clock-names: should be "xvclk".
|
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
|
- power-gpios : High active reset gpio
|
|
- reset-gpios: High active reset gpio
|
|
- pwdn-gpios: High active reset gpio
|
|
|
|
Attention:
|
|
os08a10 device address 0x36(7bit) or 0x10(7bit) is decided by SID pin;
|
|
|
|
The device node must contain one 'port' child node for its digital output
|
|
video port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
//RK356x Board
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
os08a10: os08a10@36 {
|
|
status = "okay";
|
|
compatible = "ovti,os08a10";
|
|
reg = <0x36>;
|
|
clocks = <&cru CLK_CIF_OUT>;
|
|
clock-names = "xvclk";
|
|
power-domains = <&power RK3568_PD_VI>;
|
|
avdd-supply = <&vcc_avdd>;
|
|
dovdd-supply = <&vcc_dovdd>;
|
|
dvdd-supply = <&vcc_dvdd>;
|
|
//pinctrl-names = "rockchip,camera_default", "rockchip,camera_sleep";
|
|
//pinctrl-0 = <&cam_clkout0>;
|
|
//pinctrl-1 = <&cam_sleep>;
|
|
power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "RS-8MTP659";
|
|
rockchip,camera-module-lens-name = "default";
|
|
port {
|
|
os08a10_out: endpoint {
|
|
remote-endpoint = <&mipi_in_ucam2>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
};
|
|
};
|