HYL_OK3568_LINUX/kernel-rt/arch/arm/boot/dts/rk3288-evb-rk628-hdmi2gvi-avb.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd

/dts-v1/;
#include "rk3288-evb-rk628.dtsi"

/ {
	model = "Rockchip RK3288 EVB RK628 Board";
	compatible = "rockchip,rk3288-evb-rk628", "rockchip,rk3288";

	chosen {
		bootargs = "rootwait earlycon=uart8250,mmio32,0xff690000 vmalloc=496M swiotlb=1 console=ttyFIQ0 androidboot.baseband=N/A androidboot.veritymode=enforcing androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init kpti=0";
	};

	vcc_lcd1: vcc-lcd1 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_lcd1";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		gpio = <&gpio7 RK_PB0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&vcc_io>;
	};

	panel {
		compatible = "simple-panel";
		backlight = <&backlight>;
		power-supply = <&vcc_lcd1>;
		prepare-delay-ms = <20>;
		enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
		enable-delay-ms = <200>;
		disable-delay-ms = <20>;
		unprepare-delay-ms = <20>;
		bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
		width-mm = <136>;
		height-mm = <217>;
		status = "okay";

		display-timings {
			native-mode = <&timing>;

			timing: timing {
				clock-frequency = <594000000>;
				hactive = <3840>;
				vactive = <2160>;
				hback-porch = <296>;
				hfront-porch = <176>;
				vback-porch = <72>;
				vfront-porch = <8>;
				hsync-len = <88>;
				vsync-len = <10>;
				hsync-active = <1>;
				vsync-active = <1>;
				de-active = <0>;
				pixelclk-active = <0>;
			};
		};

		port {
			panel_in_gvi: endpoint {
				remote-endpoint = <&gvi_out_panel>;
			};
		};
	};
};

&backlight {
	enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
};

&rk628 {
	pinctrl-names = "default";
	pinctrl-0 = <&test_clkout>;
	assigned-clocks = <&cru SCLK_TESTOUT_SRC>;
	assigned-clock-parents = <&xin24m>;
};

&rk628_combtxphy {
	status = "okay";
};

&hdmi {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;
		port@1 {
			reg = <1>;

			hdmi_out_hdmirx: endpoint {
				remote-endpoint = <&hdmirx_in_hdmi>;
			};
		};
	};
};

&rk628_gvi {
	pinctrl-names = "default";
	pinctrl-0 = <&rk628_gvi_hpd_pins>, <&rk628_gvi_lock_pins>;
	status = "okay";
	rockchip,lane-num = <8>;
	/* rockchip,division-mode; */

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			gvi_in_post_process: endpoint {
				remote-endpoint = <&post_process_out_gvi>;
			};
		};

		port@1 {
			reg = <1>;

			gvi_out_panel: endpoint {
				remote-endpoint = <&panel_in_gvi>;
			};
		};
	};
};

&rk628_combtxphy {
	status = "okay";
};

&rk628_post_process {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			post_process_in_hdmirx: endpoint {
				remote-endpoint = <&hdmirx_out_post_process>;
			};
		};


		port@1 {
			reg = <1>;

			post_process_out_gvi: endpoint {
				remote-endpoint = <&gvi_in_post_process>;
			};
		};
	};
};

&rk628_combrxphy {
	status = "okay";
};

&rk628_hdmirx {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;

			hdmirx_in_hdmi: endpoint {
				remote-endpoint = <&hdmi_out_hdmirx>;
			};
		};
		port@1 {
			reg = <1>;

			hdmirx_out_post_process: endpoint {
				remote-endpoint = <&post_process_in_hdmirx>;
			};
		};
	};
};

&rk628_xin_osc0_func {
	compatible = "fixed-factor-clock";
	clocks = <&cru SCLK_TESTOUT>;
	clock-mult = <1>;
	clock-div = <1>;
};

&hdmi_in_vopl {
	status = "disabled";
};

&hdmi_in_vopb {
	status = "okay";
};

&route_hdmi {
	connect = <&vopb_out_rgb>;
	status = "disabled";
};

&pinctrl {
	test {
		test_clkout: test-clkout {
			rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
		};
	};
};