84 lines
3.5 KiB
Plaintext
84 lines
3.5 KiB
Plaintext
* Rockchip I2S controller
|
|
|
|
The I2S bus (Inter-IC sound bus) is a serial link for digital
|
|
audio data transfer between devices in the system.
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be one of the following:
|
|
- "rockchip,rk3066-i2s": for rk3066
|
|
- "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
|
|
- "rockchip,rk1808-i2s", "rockchip,rk3066-i2s": for rk1808
|
|
- "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
|
|
- "rockchip,rk3128-i2s", "rockchip,rk3066-i2s": for rk3128
|
|
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
|
|
- "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
|
|
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
|
|
- "rockchip,rk3308-i2s", "rockchip,rk3066-i2s": for rk3308
|
|
- "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
|
|
- "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
|
|
- "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
|
|
- "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
|
|
- "rockchip,rv1126-i2s", "rockchip,rk3066-i2s": for rv1126
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- interrupts: should contain the I2S interrupt.
|
|
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
|
|
Documentation/devicetree/bindings/dma/dma.txt
|
|
- dma-names: should include "tx" and "rx".
|
|
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
|
|
- clock-names: should contain the following:
|
|
- "i2s_hclk": clock for I2S BUS
|
|
- "i2s_clk" : clock for I2S controller
|
|
- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
|
|
- reset-names: reset names, should include "reset-m", "reset-h", there may be only
|
|
"reset-m" on some platforms.
|
|
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
|
|
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
|
|
- rockchip,bclk-fs: configure the i2s bclk fs.
|
|
- rockchip,clk-trcm: tx and rx lrck/bclk common use.
|
|
- 0: both tx_lrck/bclk and rx_lrck/bclk are used
|
|
- 1: only tx_lrck/bclk is used
|
|
- 2: only rx_lrck/bclk is used
|
|
- rockchip,no-dmaengine: This is a boolean property. If present, driver will do not
|
|
register pcm dmaengine, only just register dai. if the dai is part of multi-dais,
|
|
the property should be present. Please refer to rockchip,multidais.txt about
|
|
multi-dais usage.
|
|
- rockchip,playback-only: Specify that the controller only has playback capability.
|
|
- rockchip,capture-only: Specify that the controller only has capture capability.
|
|
|
|
Required properties for controller which support multi channels
|
|
playback/capture:
|
|
|
|
- rockchip,grf: the phandle of the syscon node for GRF register.
|
|
|
|
Optional properties:
|
|
- rockchip,mclk-calibrate: This is a boolean value, if present, enable
|
|
clk calibrate and compenation.
|
|
|
|
note: the corresponding property 'i2s_clk_root' should be assigned.
|
|
|
|
Example for rk3288 I2S controller:
|
|
|
|
i2s@ff890000 {
|
|
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
|
|
reg = <0xff890000 0x10000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
dmas = <&pdma1 0>, <&pdma1 1>;
|
|
dma-names = "tx", "rx";
|
|
clock-names = "i2s_hclk", "i2s_clk";
|
|
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
|
|
rockchip,playback-channels = <8>;
|
|
rockchip,capture-channels = <2>;
|
|
rockchip,bclk-fs = <64>;
|
|
};
|
|
|
|
Example for RV1126 I2S controller with mclk-calibrate:
|
|
|
|
&i2s1_2ch {
|
|
status = "okay";
|
|
clocks = <&cru MCLK_I2S1>, <&cru HCLK_I2S1>, <&cru PLL_CPLL>;
|
|
clock-names = "i2s_clk", "i2s_hclk", "i2s_clk_root";
|
|
rockchip,mclk-calibrate;
|
|
};
|