// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2022 Rockchip Electronics Co., Ltd. * */ /dts-v1/; #include #include #include #include #include #include #include "rk3568.dtsi" / { model = "Rockchip RK630 RK3568 DDR3 V10 Board"; compatible = "rockchip,rk630-rk3568-ddr3-v10", "rockchip,rk3568"; chosen: chosen { bootargs = "earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait"; }; fiq-debugger { compatible = "rockchip,fiq-debugger"; rockchip,serial-id = <2>; rockchip,wake-irq = <0>; /* If enable uart uses irq instead of fiq */ rockchip,irq-mode-enable = <1>; rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; debug: debug@fd904000 { compatible = "rockchip,debug"; reg = <0x0 0xfd904000 0x0 0x1000>, <0x0 0xfd905000 0x0 0x1000>, <0x0 0xfd906000 0x0 0x1000>, <0x0 0xfd907000 0x0 0x1000>; }; cspmu: cspmu@fd90c000 { compatible = "rockchip,cspmu"; reg = <0x0 0xfd90c000 0x0 0x1000>, <0x0 0xfd90d000 0x0 0x1000>, <0x0 0xfd90e000 0x0 0x1000>, <0x0 0xfd90f000 0x0 0x1000>; }; adc_keys: adc-keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; vol-up-key { label = "volume up"; linux,code = ; press-threshold-microvolt = <1750>; }; }; dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; rk630_sound: rk630-sound { status = "okay"; compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "rockchip,rk630-codec"; simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { sound-dai = <&i2s1_8ch>; }; simple-audio-card,codec { sound-dai = <&rk630_codec>; }; }; vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc5v0_usb: vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_otg"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_lcd1_n: vcc3v3-lcd1-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd1_n"; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&pmucru CLK_RTC_32K>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h &wifi_32k>; /* * On the module itself this is one of these (depending * on the actual card populated): * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ post-power-on-delay-ms = <200>; reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; }; wireless_wlan: wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "ap6398s"; status = "okay"; }; wireless_bluetooth: wireless-bluetooth { compatible = "bluetooth-platdata"; clocks = <&pmucru CLK_RTC_32K>; clock-names = "ext_clock"; uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "rts_gpio"; pinctrl-0 = <&uart1m0_rtsn>; pinctrl-1 = <&uart1_gpios>; BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; &reserved_memory { ramoops: ramoops@110000 { compatible = "ramoops"; reg = <0x0 0x110000 0x0 0xf0000>; record-size = <0x20000>; console-size = <0x80000>; ftrace-size = <0x00000>; pmsg-size = <0x50000>; }; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &dfi { status = "okay"; }; &dmc { center-supply = <&vdd_logic>; status = "okay"; }; &gmac1_clkin { clock-frequency = <50000000>; }; &gmac1 { phy-mode = "rmii"; clock_in_out = "input"; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RMII_SPEED>, <&gmac1_clkin>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_clkinout>; phy-handle = <&rmii_phy1>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: tcs4525@1c { compatible = "tcs,tcs452x"; reg = <0x1c>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1390000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <2300>; fcs,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "pmic-sleep", "pmic-power-off", "pmic-reset"; pinctrl-0 = <&pmic_int>; pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; /* 1: rst regs (default in codes), 0: rst the pmic */ pmic-reset-func = <0>; /* not save the PMIC_POWER_EN register in uboot */ not-save-power-en = <1>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; pwrkey { status = "okay"; }; pinctrl_rk8xx: pinctrl_rk8xx { gpio-controller; #gpio-cells = <2>; rk817_slppin_null: rk817_slppin_null { pins = "gpio_slp"; function = "pin_fun0"; }; rk817_slppin_slp: rk817_slppin_slp { pins = "gpio_slp"; function = "pin_fun1"; }; rk817_slppin_pwrdn: rk817_slppin_pwrdn { pins = "gpio_slp"; function = "pin_fun2"; }; rk817_slppin_rst: rk817_slppin_rst { pins = "gpio_slp"; function = "pin_fun3"; }; }; regulators { vdd_logic: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_logic"; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_gpu"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_npu"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-boot-on; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda_0v9"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_acodec"; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_3v3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_sd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc3v3_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &i2c3 { status = "okay"; rk630: rk630@51 { reg = <0x51>; interrupt-parent = <&gpio0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; clocks = <&cru CLK_MAC1_OUT>; clock-names = "ref"; assigned-clocks = <&cru CLK_MAC1_OUT>; assigned-clock-rates = <25000000>; pinctrl-names = "default"; pinctrl-0 = <ð1m1_pins>; status = "okay"; }; }; &i2s1_8ch { status = "okay"; #sound-dai-cells = <0>; rockchip,clk-trcm = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; }; #include "rk630.dtsi" &mdio1 { rmii_phy1: phy@1 { compatible = "ethernet-phy-id0044.1400", "ethernet-phy-ieee802.3-c22"; reg = <0x1>; }; }; &pinctrl { pmic { pmic_int: pmic_int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; soc_slppin_gpio: soc_slppin_gpio { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>; }; soc_slppin_slp: soc_slppin_slp { rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_32k: wifi-32k { rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; wireless-bluetooth { uart1_gpios: uart1-gpios { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; /* * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages * must be consistent with the software configuration correspondingly * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration * should also be configured to 1.8V accordingly; * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration * should also be configured to 3.3V accordingly; * 3/ VCCIO2 voltage control selection (0xFDC20140) * BIT[0]: 0x0: from GPIO_0A7 (default) * BIT[0]: 0x1: from GRF * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: * L:VCCIO2 must supply 3.3V * H:VCCIO2 must supply 1.8V */ &pmu_io_domains { status = "okay"; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_3v3>; vccio7-supply = <&vcc_3v3>; }; &rk630_codec { status = "okay"; #sound-dai-cells = <0>; compatible = "rockchip,rk630-codec"; clocks = <&cru I2S1_MCLKOUT>; clock-names = "mclk"; assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; assigned-clock-rates = <11289600>; assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_mclk>; spk-ctl-gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; capture_volume = <31>; hp_volume = <26>; spk_volume = <26>; gpio_debug; }; &rk630_macphy { status = "okay"; }; &saradc { status = "okay"; vref-supply = <&vcca_1v8>; }; &sdhci { bus-width = <8>; supports-emmc; non-removable; max-frequency = <200000000>; status = "okay"; }; &sfc { status = "okay"; }; &tsadc { status = "okay"; }; &sdmmc1 { max-frequency = <150000000>; supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; sd-uhs-sdr104; status = "okay"; }; &uart1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; }; &wireless_wlan { pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; }; &u2phy0_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy0_otg { vbus-supply = <&vcc5v0_otg>; status = "okay"; }; &u2phy1_host { phy-supply = <&vcc5v0_host>; status = "disabled"; }; &u2phy1_otg { phy-supply = <&vcc5v0_host>; status = "disabled"; }; &usb2phy0 { status = "okay"; }; &usb2phy1 { status = "disabled"; }; &usb_host0_ehci { status = "disabled"; }; &usb_host0_ohci { status = "disabled"; }; &usb_host1_ehci { status = "disabled"; }; &usb_host1_ohci { status = "disabled"; }; &usbdrd_dwc3 { phys = <&u2phy0_otg>; phy-names = "usb2-phy"; extcon = <&usb2phy0>; maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; status = "okay"; }; &usbdrd30 { status = "okay"; }; &usbhost30 { status = "okay"; }; &combphy0_us { rockchip,dis-u3otg0-port; status = "okay"; }; &combphy1_usq { rockchip,dis-u3otg1-port; status = "okay"; }; &combphy2_psq { status = "disabled"; }; &usbhost_dwc3 { phys = <&u2phy0_host>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; status = "okay"; }; &xin32k { status = "disabled"; };