2307 lines
65 KiB
Plaintext
2307 lines
65 KiB
Plaintext
|
#
|
||
|
|
# Multimedia Video device configuration
|
||
|
|
#
|
||
|
|
|
||
|
|
if VIDEO_V4L2
|
||
|
|
|
||
|
|
config VIDEO_IR_I2C
|
||
|
|
tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
|
||
|
|
depends on I2C && RC_CORE
|
||
|
|
default y
|
||
|
|
---help---
|
||
|
|
Most boards have an IR chip directly connected via GPIO. However,
|
||
|
|
some video boards have the IR connected via I2C bus.
|
||
|
|
|
||
|
|
If your board doesn't have an I2C IR chip, you may disable this
|
||
|
|
option.
|
||
|
|
|
||
|
|
In doubt, say Y.
|
||
|
|
|
||
|
|
#
|
||
|
|
# Encoder / Decoder module configuration
|
||
|
|
#
|
||
|
|
|
||
|
|
menu "I2C Encoders, decoders, sensors and other helper chips"
|
||
|
|
visible if !MEDIA_SUBDRV_AUTOSELECT || COMPILE_TEST
|
||
|
|
|
||
|
|
comment "Audio decoders, processors and mixers"
|
||
|
|
|
||
|
|
config VIDEO_TVAUDIO
|
||
|
|
tristate "Simple audio decoder chips"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for several audio decoder chips found on some bt8xx boards:
|
||
|
|
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
|
||
|
|
tea6320, tea6420, tda8425, ta8874z.
|
||
|
|
Microchip: pic16c54 based design on ProVideo PV951 board.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tvaudio.
|
||
|
|
|
||
|
|
config VIDEO_TDA7432
|
||
|
|
tristate "Philips TDA7432 audio processor"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for tda7432 audio decoder chip found on some bt8xx boards.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tda7432.
|
||
|
|
|
||
|
|
config VIDEO_TDA9840
|
||
|
|
tristate "Philips TDA9840 audio processor"
|
||
|
|
depends on I2C
|
||
|
|
---help---
|
||
|
|
Support for tda9840 audio decoder chip found on some Zoran boards.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tda9840.
|
||
|
|
|
||
|
|
config VIDEO_TDA1997X
|
||
|
|
tristate "NXP TDA1997x HDMI receiver"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on SND_SOC
|
||
|
|
select HDMI
|
||
|
|
select SND_PCM
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tda1997x.
|
||
|
|
|
||
|
|
config VIDEO_TEA6415C
|
||
|
|
tristate "Philips TEA6415C audio processor"
|
||
|
|
depends on I2C
|
||
|
|
---help---
|
||
|
|
Support for tea6415c audio decoder chip found on some bt8xx boards.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tea6415c.
|
||
|
|
|
||
|
|
config VIDEO_TEA6420
|
||
|
|
tristate "Philips TEA6420 audio processor"
|
||
|
|
depends on I2C
|
||
|
|
---help---
|
||
|
|
Support for tea6420 audio decoder chip found on some bt8xx boards.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tea6420.
|
||
|
|
|
||
|
|
config VIDEO_MSP3400
|
||
|
|
tristate "Micronas MSP34xx audio decoders"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Micronas MSP34xx series of audio decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called msp3400.
|
||
|
|
|
||
|
|
config VIDEO_CS3308
|
||
|
|
tristate "Cirrus Logic CS3308 audio ADC"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Cirrus Logic CS3308 High Performance 8-Channel
|
||
|
|
Analog Volume Control
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called cs3308.
|
||
|
|
|
||
|
|
config VIDEO_CS5345
|
||
|
|
tristate "Cirrus Logic CS5345 audio ADC"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
|
||
|
|
stereo A/D converter.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called cs5345.
|
||
|
|
|
||
|
|
config VIDEO_CS53L32A
|
||
|
|
tristate "Cirrus Logic CS53L32A audio ADC"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Cirrus Logic CS53L32A low voltage
|
||
|
|
stereo A/D converter.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called cs53l32a.
|
||
|
|
|
||
|
|
config VIDEO_TLV320AIC23B
|
||
|
|
tristate "Texas Instruments TLV320AIC23B audio codec"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Texas Instruments TLV320AIC23B audio codec.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tlv320aic23b.
|
||
|
|
|
||
|
|
config VIDEO_UDA1342
|
||
|
|
tristate "Philips UDA1342 audio codec"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips UDA1342 audio codec.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called uda1342.
|
||
|
|
|
||
|
|
config VIDEO_WM8775
|
||
|
|
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Wolfson Microelectronics WM8775 high
|
||
|
|
performance stereo A/D Converter with a 4 channel input mixer.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called wm8775.
|
||
|
|
|
||
|
|
config VIDEO_WM8739
|
||
|
|
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Wolfson Microelectronics WM8739
|
||
|
|
stereo A/D Converter.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called wm8739.
|
||
|
|
|
||
|
|
config VIDEO_VP27SMPX
|
||
|
|
tristate "Panasonic VP27's internal MPX"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the internal MPX of the Panasonic VP27s tuner.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called vp27smpx.
|
||
|
|
|
||
|
|
config VIDEO_SONY_BTF_MPX
|
||
|
|
tristate "Sony BTF's internal MPX"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
help
|
||
|
|
Support for the internal MPX of the Sony BTF-PG472Z tuner.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sony-btf-mpx.
|
||
|
|
|
||
|
|
comment "RDS decoders"
|
||
|
|
|
||
|
|
config VIDEO_SAA6588
|
||
|
|
tristate "SAA6588 Radio Chip RDS decoder support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
|
||
|
|
help
|
||
|
|
Support for this Radio Data System (RDS) decoder. This allows
|
||
|
|
seeing radio station identification transmitted using this
|
||
|
|
standard.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa6588.
|
||
|
|
|
||
|
|
comment "Video decoders"
|
||
|
|
|
||
|
|
config VIDEO_ADV7180
|
||
|
|
tristate "Analog Devices ADV7180 decoder"
|
||
|
|
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7180 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7180.
|
||
|
|
|
||
|
|
config VIDEO_ADV7183
|
||
|
|
tristate "Analog Devices ADV7183 decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
V4l2 subdevice driver for the Analog Devices
|
||
|
|
ADV7183 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7183.
|
||
|
|
|
||
|
|
config VIDEO_ADV748X
|
||
|
|
tristate "Analog Devices ADV748x decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on OF
|
||
|
|
select REGMAP_I2C
|
||
|
|
---help---
|
||
|
|
V4L2 subdevice driver for the Analog Devices
|
||
|
|
ADV7481 and ADV7482 HDMI/Analog video decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv748x.
|
||
|
|
|
||
|
|
config VIDEO_ADV7604
|
||
|
|
tristate "Analog Devices ADV7604 decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on GPIOLIB || COMPILE_TEST
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7604 video decoder.
|
||
|
|
|
||
|
|
This is a Analog Devices Component/Graphics Digitizer
|
||
|
|
with 4:1 Multiplexed HDMI Receiver.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7604.
|
||
|
|
|
||
|
|
config VIDEO_ADV7604_CEC
|
||
|
|
bool "Enable Analog Devices ADV7604 CEC support"
|
||
|
|
depends on VIDEO_ADV7604
|
||
|
|
select CEC_CORE
|
||
|
|
---help---
|
||
|
|
When selected the adv7604 will support the optional
|
||
|
|
HDMI CEC feature.
|
||
|
|
|
||
|
|
config VIDEO_ADV7842
|
||
|
|
tristate "Analog Devices ADV7842 decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7842 video decoder.
|
||
|
|
|
||
|
|
This is a Analog Devices Component/Graphics/SD Digitizer
|
||
|
|
with 2:1 Multiplexed HDMI Receiver.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7842.
|
||
|
|
|
||
|
|
config VIDEO_ADV7842_CEC
|
||
|
|
bool "Enable Analog Devices ADV7842 CEC support"
|
||
|
|
depends on VIDEO_ADV7842
|
||
|
|
select CEC_CORE
|
||
|
|
---help---
|
||
|
|
When selected the adv7842 will support the optional
|
||
|
|
HDMI CEC feature.
|
||
|
|
|
||
|
|
config VIDEO_BT819
|
||
|
|
tristate "BT819A VideoStream decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for BT819A video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called bt819.
|
||
|
|
|
||
|
|
config VIDEO_BT856
|
||
|
|
tristate "BT856 VideoStream decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for BT856 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called bt856.
|
||
|
|
|
||
|
|
config VIDEO_BT866
|
||
|
|
tristate "BT866 VideoStream decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for BT866 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called bt866.
|
||
|
|
|
||
|
|
config VIDEO_KS0127
|
||
|
|
tristate "KS0127 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for KS0127 video decoder.
|
||
|
|
|
||
|
|
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
|
||
|
|
cards.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ks0127.
|
||
|
|
|
||
|
|
config VIDEO_ML86V7667
|
||
|
|
tristate "OKI ML86V7667 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the OKI Semiconductor ML86V7667 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ml86v7667.
|
||
|
|
|
||
|
|
config VIDEO_AD5820
|
||
|
|
tristate "AD5820 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
---help---
|
||
|
|
This is a driver for the AD5820 camera lens voice coil.
|
||
|
|
It is used for example in Nokia N900 (RX-51).
|
||
|
|
|
||
|
|
config VIDEO_AK7375
|
||
|
|
tristate "AK7375 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a driver for the AK7375 camera lens voice coil.
|
||
|
|
AK7375 is a 12 bit DAC with 120mA output current sink
|
||
|
|
capability. This is designed for linear control of
|
||
|
|
voice coil motors, controlled via I2C serial interface.
|
||
|
|
|
||
|
|
config VIDEO_DW9714
|
||
|
|
tristate "DW9714 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
This is a driver for the DW9714 camera lens voice coil.
|
||
|
|
DW9714 is a 10 bit DAC with 120mA output current sink
|
||
|
|
capability. This is designed for linear control of
|
||
|
|
voice coil motors, controlled via I2C serial interface.
|
||
|
|
|
||
|
|
config VIDEO_DW9718
|
||
|
|
tristate "DW9718 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
This is a driver for the DW9718 camera lens voice coil.
|
||
|
|
DW9718 is a 10 bit DAC with 100mA output current sink
|
||
|
|
capability. This is designed for linear control of
|
||
|
|
voice coil motors, controlled via I2C serial interface.
|
||
|
|
|
||
|
|
config VIDEO_DW9807_VCM
|
||
|
|
tristate "DW9807 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
This is a driver for the DW9807 camera lens voice coil.
|
||
|
|
DW9807 is a 10 bit DAC with 100mA output current sink
|
||
|
|
capability. This is designed for linear control of
|
||
|
|
voice coil motors, controlled via I2C serial interface.
|
||
|
|
|
||
|
|
config VIDEO_FP5501
|
||
|
|
tristate "FP5501 step motor driver for camera focus/zoom"
|
||
|
|
depends on VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
help
|
||
|
|
This a driver used GPIO to drive motor
|
||
|
|
|
||
|
|
config VIDEO_FP5510
|
||
|
|
tristate "FP5510 lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a driver for the FP5510 camera lens voice coil.
|
||
|
|
|
||
|
|
config VIDEO_GT9760S
|
||
|
|
tristate "GT9760S lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a driver for the GT9760S camera lens voice coil.
|
||
|
|
|
||
|
|
config VIDEO_VM149C
|
||
|
|
tristate "VM149C lens voice coil support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a driver for the VM149C camera lens voice coil.
|
||
|
|
|
||
|
|
config VIDEO_OTP_EEPROM
|
||
|
|
tristate "sensor otp from eeprom support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This driver supports OTP load from eeprom.
|
||
|
|
|
||
|
|
config VIDEO_SAA7110
|
||
|
|
tristate "Philips SAA7110 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA7110 video decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa7110.
|
||
|
|
|
||
|
|
config VIDEO_SAA711X
|
||
|
|
tristate "Philips SAA7111/3/4/5 video decoders"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA7111/3/4/5 video decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa7115.
|
||
|
|
|
||
|
|
config VIDEO_TC358743
|
||
|
|
tristate "Toshiba TC358743 decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tc358743.
|
||
|
|
|
||
|
|
config VIDEO_TC358743_CEC
|
||
|
|
bool "Enable Toshiba TC358743 CEC support"
|
||
|
|
depends on VIDEO_TC358743
|
||
|
|
select CEC_CORE
|
||
|
|
---help---
|
||
|
|
When selected the tc358743 will support the optional
|
||
|
|
HDMI CEC feature.
|
||
|
|
|
||
|
|
config VIDEO_TC35874X
|
||
|
|
tristate "Toshiba TC35874X decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the Toshiba TC35874X series HDMI to MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tc35874x.
|
||
|
|
|
||
|
|
config VIDEO_RK628_CSI
|
||
|
|
tristate "Rockchip RK628_CSI decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
select VIDEO_ROCKCHIP_HDMIRX_CLASS
|
||
|
|
help
|
||
|
|
Support for the Rockchip RK628 HDMI to MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called rk628-csi.
|
||
|
|
|
||
|
|
config VIDEO_LT6911UXC
|
||
|
|
tristate "Lontium LT6911UXC decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
select VIDEO_ROCKCHIP_HDMIRX_CLASS
|
||
|
|
help
|
||
|
|
Support for the Lontium LT6911UXC series HDMI to MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called lt6911uxc.
|
||
|
|
|
||
|
|
config VIDEO_LT7911D
|
||
|
|
tristate "Lontium LT7911D decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the Lontium LT7911D series type-c DP to MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called lt7911d.
|
||
|
|
|
||
|
|
config VIDEO_LT8619C
|
||
|
|
tristate "Lontium LT8619C decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the Lontium LT8619C HDMI to BT656/BT1120 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called lt8619c.
|
||
|
|
|
||
|
|
config VIDEO_TECHPOINT
|
||
|
|
tristate "TechPoint decoder"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
Support for the TechPoint Multichannel digital decode to
|
||
|
|
MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called TechPoint.
|
||
|
|
|
||
|
|
config VIDEO_TVP514X
|
||
|
|
tristate "Texas Instruments TVP514x video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the TI TVP5146/47
|
||
|
|
decoder. It is currently working with the TI OMAP3 camera
|
||
|
|
controller.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tvp514x.
|
||
|
|
|
||
|
|
config VIDEO_TVP5150
|
||
|
|
tristate "Texas Instruments TVP5150 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
Support for the Texas Instruments TVP5150 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tvp5150.
|
||
|
|
|
||
|
|
config VIDEO_TVP7002
|
||
|
|
tristate "Texas Instruments TVP7002 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
Support for the Texas Instruments TVP7002 video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tvp7002.
|
||
|
|
|
||
|
|
config VIDEO_TW2804
|
||
|
|
tristate "Techwell TW2804 multiple video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Techwell tw2804 multiple video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tw2804.
|
||
|
|
|
||
|
|
config VIDEO_TW9903
|
||
|
|
tristate "Techwell TW9903 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Techwell tw9903 multi-standard video decoder
|
||
|
|
with high quality down scaler.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tw9903.
|
||
|
|
|
||
|
|
config VIDEO_TW9906
|
||
|
|
tristate "Techwell TW9906 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Techwell tw9906 enhanced multi-standard comb filter
|
||
|
|
video decoder with YCbCr input support.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tw9906.
|
||
|
|
|
||
|
|
config VIDEO_TW9910
|
||
|
|
tristate "Techwell TW9910 video decoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called tw9910.
|
||
|
|
|
||
|
|
config VIDEO_VPX3220
|
||
|
|
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for VPX322x video decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called vpx3220.
|
||
|
|
|
||
|
|
comment "Video and audio decoders"
|
||
|
|
|
||
|
|
config VIDEO_SAA717X
|
||
|
|
tristate "Philips SAA7171/3/4 audio/video decoders"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA7171/3/4 audio/video decoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa717x.
|
||
|
|
|
||
|
|
source "drivers/media/i2c/cx25840/Kconfig"
|
||
|
|
|
||
|
|
comment "Video encoders"
|
||
|
|
|
||
|
|
config VIDEO_SAA7127
|
||
|
|
tristate "Philips SAA7127/9 digital video encoders"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA7127/9 digital video encoders.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa7127.
|
||
|
|
|
||
|
|
config VIDEO_SAA7185
|
||
|
|
tristate "Philips SAA7185 video encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA7185 video encoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa7185.
|
||
|
|
|
||
|
|
config VIDEO_ADV7170
|
||
|
|
tristate "Analog Devices ADV7170 video encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7170 video encoder driver
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7170.
|
||
|
|
|
||
|
|
config VIDEO_ADV7175
|
||
|
|
tristate "Analog Devices ADV7175 video encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7175 video encoder driver
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7175.
|
||
|
|
|
||
|
|
config VIDEO_ADV7343
|
||
|
|
tristate "ADV7343 video encoder"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
Support for Analog Devices I2C bus based ADV7343 encoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7343.
|
||
|
|
|
||
|
|
config VIDEO_ADV7393
|
||
|
|
tristate "ADV7393 video encoder"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
Support for Analog Devices I2C bus based ADV7393 encoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7393.
|
||
|
|
|
||
|
|
config VIDEO_ADV7511
|
||
|
|
tristate "Analog Devices ADV7511 encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select HDMI
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices ADV7511 video encoder.
|
||
|
|
|
||
|
|
This is a Analog Devices HDMI transmitter.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called adv7511.
|
||
|
|
|
||
|
|
config VIDEO_ADV7511_CEC
|
||
|
|
bool "Enable Analog Devices ADV7511 CEC support"
|
||
|
|
depends on VIDEO_ADV7511
|
||
|
|
select CEC_CORE
|
||
|
|
---help---
|
||
|
|
When selected the adv7511 will support the optional
|
||
|
|
HDMI CEC feature.
|
||
|
|
|
||
|
|
config VIDEO_AD9389B
|
||
|
|
tristate "Analog Devices AD9389B encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
Support for the Analog Devices AD9389B video encoder.
|
||
|
|
|
||
|
|
This is a Analog Devices HDMI transmitter.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ad9389b.
|
||
|
|
|
||
|
|
config VIDEO_AK881X
|
||
|
|
tristate "AK8813/AK8814 video encoders"
|
||
|
|
depends on I2C
|
||
|
|
help
|
||
|
|
Video output driver for AKM AK8813 and AK8814 TV encoders
|
||
|
|
|
||
|
|
config VIDEO_THS8200
|
||
|
|
tristate "Texas Instruments THS8200 video encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Texas Instruments THS8200 video encoder.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ths8200.
|
||
|
|
|
||
|
|
comment "Camera sensor devices"
|
||
|
|
|
||
|
|
config VIDEO_APTINA_PLL
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config VIDEO_SMIAPP_PLL
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config VIDEO_IMX178
|
||
|
|
tristate "Sony IMX178 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX178 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx178.
|
||
|
|
|
||
|
|
config VIDEO_IMX214
|
||
|
|
tristate "Sony IMX214 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX214 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx214.
|
||
|
|
|
||
|
|
config VIDEO_IMX214_EEPROM
|
||
|
|
tristate "Sony imx214 sensor otp from eeprom support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
depends on VIDEO_IMX214
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This driver supports IMX214 OTP load from eeprom.
|
||
|
|
|
||
|
|
config VIDEO_IMX219
|
||
|
|
tristate "Sony IMX219 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX219 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx219.
|
||
|
|
|
||
|
|
config VIDEO_IMX241
|
||
|
|
tristate "Sony IMX241 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX241 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx241.
|
||
|
|
|
||
|
|
config VIDEO_IMX258
|
||
|
|
tristate "Sony IMX258 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX258 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx258.
|
||
|
|
|
||
|
|
config VIDEO_IMX258_EEPROM
|
||
|
|
tristate "Sony imx258 sensor otp from eeprom support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
depends on VIDEO_IMX258
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This driver supports IMX258 OTP load from eeprom.
|
||
|
|
|
||
|
|
config VIDEO_IMX274
|
||
|
|
tristate "Sony IMX274 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select REGMAP_I2C
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for the Sony IMX274
|
||
|
|
CMOS image sensor.
|
||
|
|
|
||
|
|
config VIDEO_IMX307
|
||
|
|
tristate "Sony IMX307 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX307 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx307.
|
||
|
|
|
||
|
|
config VIDEO_IMX317
|
||
|
|
tristate "Sony IMX317 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX317 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx317.
|
||
|
|
|
||
|
|
config VIDEO_IMX323
|
||
|
|
tristate "Sony IMX323 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX323 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx323.
|
||
|
|
|
||
|
|
config VIDEO_IMX327
|
||
|
|
tristate "Sony IMX327 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX327 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx327.
|
||
|
|
|
||
|
|
config VIDEO_IMX334
|
||
|
|
tristate "Sony IMX334 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX334 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx334.
|
||
|
|
|
||
|
|
config VIDEO_IMX335
|
||
|
|
tristate "Sony IMX335 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX335 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx335.
|
||
|
|
|
||
|
|
config VIDEO_IMX347
|
||
|
|
tristate "Sony IMX347 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX347 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx347.
|
||
|
|
|
||
|
|
config VIDEO_IMX378
|
||
|
|
tristate "Sony IMX378 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX378 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx378.
|
||
|
|
|
||
|
|
config VIDEO_IMX415
|
||
|
|
tristate "Sony IMX415 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX415 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx415.
|
||
|
|
|
||
|
|
config VIDEO_IMX462
|
||
|
|
tristate "Sony IMX462 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX462 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx462.
|
||
|
|
|
||
|
|
config VIDEO_IMX464
|
||
|
|
tristate "Sony IMX464 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Sony
|
||
|
|
IMX464 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called imx464.
|
||
|
|
|
||
|
|
config VIDEO_OS02G10
|
||
|
|
tristate "OmniVision OS02G10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS02G10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS04A10
|
||
|
|
tristate "OmniVision OS04A10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS04A10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS04C10
|
||
|
|
tristate "OmniVision OS04C10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS04C10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS05A20
|
||
|
|
tristate "OmniVision OS05A20 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS05A20 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS08A10
|
||
|
|
tristate "OmniVision OS08A10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS08A10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS08A20
|
||
|
|
tristate "OmniVision OS08A20 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS08A20 camera.
|
||
|
|
|
||
|
|
config VIDEO_OS12D40
|
||
|
|
tristate "OmniVision OS12D40 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OS12D40 camera.
|
||
|
|
|
||
|
|
config VIDEO_OV02B10
|
||
|
|
tristate "OmniVision OV02B10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV02B10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OV02K10
|
||
|
|
tristate "OmniVision OV02K10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV02K10 camera.
|
||
|
|
|
||
|
|
config VIDEO_OV2640
|
||
|
|
tristate "OmniVision OV2640 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2640 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2640.
|
||
|
|
|
||
|
|
config VIDEO_OV2659
|
||
|
|
tristate "OmniVision OV2659 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2659 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2659.
|
||
|
|
|
||
|
|
config VIDEO_OV2680
|
||
|
|
tristate "OmniVision OV2680 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2680 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2680.
|
||
|
|
|
||
|
|
config VIDEO_OV2685
|
||
|
|
tristate "OmniVision OV2685 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2685 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2685.
|
||
|
|
|
||
|
|
config VIDEO_OV2718
|
||
|
|
tristate "OmniVision OV2718 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2718 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2718.
|
||
|
|
|
||
|
|
config VIDEO_OV2735
|
||
|
|
tristate "OmniVision OV2735 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2735 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2735.
|
||
|
|
|
||
|
|
config VIDEO_OV2775
|
||
|
|
tristate "OmniVision OV2775 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV2775 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov2775.
|
||
|
|
|
||
|
|
config VIDEO_OV4686
|
||
|
|
tristate "OmniVision OV4686 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV4686 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov4686.
|
||
|
|
|
||
|
|
config VIDEO_OV4688
|
||
|
|
tristate "OmniVision OV4688 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV4688 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov4688.
|
||
|
|
|
||
|
|
config VIDEO_OV4689
|
||
|
|
tristate "OmniVision OV4689 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV4689 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov4689.
|
||
|
|
|
||
|
|
config VIDEO_OV5640
|
||
|
|
tristate "OmniVision OV5640 sensor support"
|
||
|
|
depends on OF
|
||
|
|
depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Omnivision
|
||
|
|
OV5640 camera sensor with a MIPI CSI-2 interface.
|
||
|
|
|
||
|
|
config VIDEO_OV5645
|
||
|
|
tristate "OmniVision OV5645 sensor support"
|
||
|
|
depends on OF
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV5645 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov5645.
|
||
|
|
|
||
|
|
config VIDEO_OV5647
|
||
|
|
tristate "OmniVision OV5647 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV5647 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov5647.
|
||
|
|
|
||
|
|
config VIDEO_OV5648
|
||
|
|
tristate "OmniVision OV5648 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV5648 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov5648.
|
||
|
|
|
||
|
|
config VIDEO_OV5670
|
||
|
|
tristate "OmniVision OV5670 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV5670 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov5670.
|
||
|
|
|
||
|
|
config VIDEO_OV5695
|
||
|
|
tristate "OmniVision OV5695 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV5695 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov5695.
|
||
|
|
|
||
|
|
config VIDEO_OV6650
|
||
|
|
tristate "OmniVision OV6650 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV6650 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov6650.
|
||
|
|
|
||
|
|
config VIDEO_OV7251
|
||
|
|
tristate "OmniVision OV7251 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV7251 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov7251.
|
||
|
|
|
||
|
|
config VIDEO_OV772X
|
||
|
|
tristate "OmniVision OV772x sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV772x camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov772x.
|
||
|
|
|
||
|
|
config VIDEO_OV7640
|
||
|
|
tristate "OmniVision OV7640 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV7640 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov7640.
|
||
|
|
|
||
|
|
config VIDEO_OV7670
|
||
|
|
tristate "OmniVision OV7670 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV7670 VGA camera. It currently only works with the M88ALP01
|
||
|
|
controller.
|
||
|
|
|
||
|
|
config VIDEO_OV7740
|
||
|
|
tristate "OmniVision OV7740 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV7740 VGA camera sensor.
|
||
|
|
|
||
|
|
config VIDEO_OV7750
|
||
|
|
tristate "OmniVision OV7750 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
depends on MEDIA_CONTROLLER
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV7750 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov7750.
|
||
|
|
|
||
|
|
config VIDEO_OV8858
|
||
|
|
tristate "OmniVision OV8858 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV8858 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov8858.
|
||
|
|
|
||
|
|
config VIDEO_OV9281
|
||
|
|
tristate "OmniVision OV9281 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV9281 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov9281.
|
||
|
|
|
||
|
|
config VIDEO_OV9650
|
||
|
|
tristate "OmniVision OV9650 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV9650 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov9650.
|
||
|
|
|
||
|
|
config VIDEO_OV9750
|
||
|
|
tristate "OmniVision OV9750 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV9750 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ov9750.
|
||
|
|
|
||
|
|
config VIDEO_OV12D2Q
|
||
|
|
tristate "OmniVision OV12D2Q sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV12D2Q camera.
|
||
|
|
|
||
|
|
config VIDEO_OV13850
|
||
|
|
tristate "OmniVision OV13850 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV13850 camera.
|
||
|
|
|
||
|
|
config VIDEO_OV13858
|
||
|
|
tristate "OmniVision OV13858 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV13858 camera.
|
||
|
|
|
||
|
|
config VIDEO_OV13B10
|
||
|
|
tristate "OmniVision OV13B10 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the OmniVision
|
||
|
|
OV13B10 camera.
|
||
|
|
|
||
|
|
config VIDEO_PREISP_DUMMY_SENSOR
|
||
|
|
tristate "Preisp dummy sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
Support for the preisp dummy sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called pisp_dmy.
|
||
|
|
|
||
|
|
config VIDEO_VS6624
|
||
|
|
tristate "ST VS6624 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the ST VS6624
|
||
|
|
camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called vs6624.
|
||
|
|
|
||
|
|
config VIDEO_MT9M032
|
||
|
|
tristate "MT9M032 camera sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select VIDEO_APTINA_PLL
|
||
|
|
---help---
|
||
|
|
This driver supports MT9M032 camera sensors from Aptina, monochrome
|
||
|
|
models only.
|
||
|
|
|
||
|
|
config VIDEO_MT9M111
|
||
|
|
tristate "mt9m111, mt9m112 and mt9m131 support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
help
|
||
|
|
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
|
||
|
|
Micron/Aptina
|
||
|
|
|
||
|
|
config VIDEO_MT9P031
|
||
|
|
tristate "Aptina MT9P031 support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select VIDEO_APTINA_PLL
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Aptina
|
||
|
|
(Micron) mt9p031 5 Mpixel camera.
|
||
|
|
|
||
|
|
config VIDEO_MT9T001
|
||
|
|
tristate "Aptina MT9T001 support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Aptina
|
||
|
|
(Micron) mt0t001 3 Mpixel camera.
|
||
|
|
|
||
|
|
config VIDEO_MT9T112
|
||
|
|
tristate "Aptina MT9T111/MT9T112 support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Aptina
|
||
|
|
(Micron) MT9T111 and MT9T112 3 Mpixel camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called mt9t112.
|
||
|
|
|
||
|
|
config VIDEO_MT9V011
|
||
|
|
tristate "Micron mt9v011 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Micron
|
||
|
|
mt0v011 1.3 Mpixel camera. It currently only works with the
|
||
|
|
em28xx driver.
|
||
|
|
|
||
|
|
config VIDEO_MT9V032
|
||
|
|
tristate "Micron MT9V032 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select REGMAP_I2C
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a Video4Linux2 sensor driver for the Micron
|
||
|
|
MT9V032 752x480 CMOS sensor.
|
||
|
|
|
||
|
|
config VIDEO_MT9V111
|
||
|
|
tristate "Aptina MT9V111 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Aptina/Micron
|
||
|
|
MT9V111 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called mt9v111.
|
||
|
|
|
||
|
|
config VIDEO_AR0230
|
||
|
|
tristate "Aptina AR0230 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the Aptina AR0230 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ar0230.
|
||
|
|
|
||
|
|
config VIDEO_SR030PC30
|
||
|
|
tristate "Siliconfile SR030PC30 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This driver supports SR030PC30 VGA camera from Siliconfile
|
||
|
|
|
||
|
|
config VIDEO_NOON010PC30
|
||
|
|
tristate "Siliconfile NOON010PC30 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This driver supports NOON010PC30 CIF camera from Siliconfile
|
||
|
|
|
||
|
|
source "drivers/media/i2c/m5mols/Kconfig"
|
||
|
|
|
||
|
|
config VIDEO_RJ54N1
|
||
|
|
tristate "Sharp RJ54N1CB0C sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
help
|
||
|
|
This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
|
||
|
|
sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called rj54n1.
|
||
|
|
|
||
|
|
config VIDEO_S5K6AA
|
||
|
|
tristate "Samsung S5K6AAFX sensor support"
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
|
||
|
|
camera sensor with an embedded SoC image signal processor.
|
||
|
|
|
||
|
|
config VIDEO_S5K6A3
|
||
|
|
tristate "Samsung S5K6A3 sensor support"
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for Samsung S5K6A3 raw
|
||
|
|
camera sensor.
|
||
|
|
|
||
|
|
config VIDEO_S5KGM1SP
|
||
|
|
tristate "Samsung S5KGM1SP sensor support"
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a V4L2 sensor driver for Samsung S5KGM1SP raw
|
||
|
|
camera sensor.
|
||
|
|
|
||
|
|
config VIDEO_S5K4H7YX
|
||
|
|
tristate "Samsung S5K4H7YX sensor support"
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a V4L2 sensor driver for Samsung S5K4H7YX raw
|
||
|
|
camera sensor.
|
||
|
|
|
||
|
|
config VIDEO_S5K4ECGX
|
||
|
|
tristate "Samsung S5K4ECGX sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select CRC32
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
|
||
|
|
camera sensor with an embedded SoC image signal processor.
|
||
|
|
|
||
|
|
config VIDEO_S5K5BAF
|
||
|
|
tristate "Samsung S5K5BAF sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for Samsung S5K5BAF 2M
|
||
|
|
camera sensor with an embedded SoC image signal processor.
|
||
|
|
|
||
|
|
source "drivers/media/i2c/smiapp/Kconfig"
|
||
|
|
source "drivers/media/i2c/et8ek8/Kconfig"
|
||
|
|
|
||
|
|
config VIDEO_S5C73M3
|
||
|
|
tristate "Samsung S5C73M3 sensor support"
|
||
|
|
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
This is a V4L2 sensor driver for Samsung S5C73M3
|
||
|
|
8 Mpixel camera.
|
||
|
|
|
||
|
|
config VIDEO_GC02M2
|
||
|
|
tristate "GalaxyCore GC02M2 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC02M2 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc02m2.
|
||
|
|
|
||
|
|
config VIDEO_GC030A
|
||
|
|
tristate "GalaxyCore GC030A sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC030A sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc030A.
|
||
|
|
|
||
|
|
config VIDEO_GC0312
|
||
|
|
tristate "GalaxyCore GC0312 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC0312 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc0312.
|
||
|
|
|
||
|
|
config VIDEO_GC0329
|
||
|
|
tristate "GalaxyCore GC0329 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC0329 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc0329.
|
||
|
|
|
||
|
|
config VIDEO_GC032A
|
||
|
|
tristate "GalaxyCore GC032A sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC032A sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc032a.
|
||
|
|
|
||
|
|
config VIDEO_GC0403
|
||
|
|
tristate "GalaxyCore GC0403 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC0403 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc0403.
|
||
|
|
|
||
|
|
config VIDEO_GC1054
|
||
|
|
tristate "GalaxyCore GC1054 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC1054 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc1054.
|
||
|
|
|
||
|
|
config VIDEO_GC2035
|
||
|
|
tristate "GalaxyCore GC2035 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2035 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2035.
|
||
|
|
|
||
|
|
config VIDEO_GC2053
|
||
|
|
tristate "GalaxyCore GC2053 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2053 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2053.
|
||
|
|
|
||
|
|
config VIDEO_GC2093
|
||
|
|
tristate "GalaxyCore GC2093 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2093 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2093.
|
||
|
|
|
||
|
|
config VIDEO_GC2145
|
||
|
|
tristate "GalaxyCore GC2145 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2145 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2145.
|
||
|
|
|
||
|
|
config VIDEO_GC2155
|
||
|
|
tristate "GalaxyCore GC2155 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2155 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2155.
|
||
|
|
|
||
|
|
config VIDEO_GC2355
|
||
|
|
tristate "GalaxyCore GC2355 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2355 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2355.
|
||
|
|
|
||
|
|
config VIDEO_GC2375H
|
||
|
|
tristate "GalaxyCore GC2375h sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2375h sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2375h.
|
||
|
|
|
||
|
|
config VIDEO_GC2385
|
||
|
|
tristate "GalaxyCore GC2385 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC2385 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc2385.
|
||
|
|
|
||
|
|
config VIDEO_GC4653
|
||
|
|
tristate "GalaxyCore GC4653 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC4653 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc4653.
|
||
|
|
|
||
|
|
config VIDEO_GC4663
|
||
|
|
tristate "GalaxyCore GC4663 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC4663 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc4663.
|
||
|
|
|
||
|
|
config VIDEO_GC4C33
|
||
|
|
tristate "GalaxyCore GC4C33 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC4C33 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc4C33.
|
||
|
|
|
||
|
|
config VIDEO_GC5024
|
||
|
|
tristate "GalaxyCore GC5024 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC5024 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc5024.
|
||
|
|
|
||
|
|
config VIDEO_GC5025
|
||
|
|
tristate "GalaxyCore GC5025 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC5025 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc5025.
|
||
|
|
|
||
|
|
config VIDEO_GC5035
|
||
|
|
tristate "GalaxyCore GC5035 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC5035 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc5035.
|
||
|
|
|
||
|
|
config VIDEO_GC8034
|
||
|
|
tristate "GalaxyCore GC8034 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the GalaxyCore GC8034 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called gc8034.
|
||
|
|
|
||
|
|
config VIDEO_BF3925
|
||
|
|
tristate "BYD BF3925 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the BYD BF3925 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called bf3925.
|
||
|
|
|
||
|
|
config VIDEO_JX_F37
|
||
|
|
tristate "SOI JX_F37 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SOI JX_F37 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jx_f37.
|
||
|
|
|
||
|
|
config VIDEO_JX_F37P
|
||
|
|
tristate "SOI JX_F37P sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SOI JX_F37P sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jx_f37p.
|
||
|
|
|
||
|
|
config VIDEO_JX_H62
|
||
|
|
tristate "SOI JX_H62 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SOI JX_H62 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jx_h62.
|
||
|
|
|
||
|
|
config VIDEO_JX_H65
|
||
|
|
tristate "SOI JX_H65 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SOI JX_H65 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jx_h65.
|
||
|
|
|
||
|
|
config VIDEO_JX_K04
|
||
|
|
tristate "SOI JX_K04 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SOI JX_K04 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jx_k04.
|
||
|
|
|
||
|
|
config VIDEO_SC031GS
|
||
|
|
tristate "SmartSens SC031GS sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC031GS sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc031gs.
|
||
|
|
|
||
|
|
config VIDEO_SC035HGS
|
||
|
|
tristate "SmartSens SC035HGS sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC035HGS sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc035hgs.
|
||
|
|
|
||
|
|
config VIDEO_SC1330
|
||
|
|
tristate "SmartSens SC1330 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC1330 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC1330.
|
||
|
|
|
||
|
|
config VIDEO_SC132GS
|
||
|
|
tristate "SmartSens SC132GS sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC132GS sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc132gs.
|
||
|
|
|
||
|
|
config VIDEO_SC200AI
|
||
|
|
tristate "smartsens,sc200ai sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
---help---
|
||
|
|
Support for the smartsens,sc200ai sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc200ai.
|
||
|
|
|
||
|
|
config VIDEO_SC210IOT
|
||
|
|
tristate "SmartSens SC210iot sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC210iot sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc210iot.
|
||
|
|
|
||
|
|
config VIDEO_SC2232
|
||
|
|
tristate "SmartSens SC2232 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC2232 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc2232.
|
||
|
|
|
||
|
|
config VIDEO_SC2239
|
||
|
|
tristate "SmartSens SC2239 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC2239 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc2239.
|
||
|
|
|
||
|
|
config VIDEO_SC223A
|
||
|
|
tristate "SmartSens SC223A sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC223A sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc223a.
|
||
|
|
|
||
|
|
config VIDEO_SC2310
|
||
|
|
tristate "SmartSens SC2310 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC2310 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc2310.
|
||
|
|
|
||
|
|
config VIDEO_SC2335
|
||
|
|
tristate "SmartSens SC2335 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC2335 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc2335.
|
||
|
|
|
||
|
|
config VIDEO_SC2355
|
||
|
|
tristate "SmartSens SC2355 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC2355 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc2355.
|
||
|
|
|
||
|
|
config VIDEO_SC3336
|
||
|
|
tristate "SmartSens SC3336 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC3336 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc3336.
|
||
|
|
|
||
|
|
config VIDEO_SC401AI
|
||
|
|
tristate "SmartSens SC401AI sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC401AI sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC401AI.
|
||
|
|
|
||
|
|
config VIDEO_SC4238
|
||
|
|
tristate "SmartSens SC4238 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC4238 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called sc4238.
|
||
|
|
|
||
|
|
config VIDEO_SC430CS
|
||
|
|
tristate "SmartSens SC430CS sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC430CS sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC430CS.
|
||
|
|
|
||
|
|
config VIDEO_SC4336
|
||
|
|
tristate "SmartSens SC4336 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2
|
||
|
|
select MEDIA_CONTROLLER
|
||
|
|
select VIDEO_V4L2_SUBDEV_API
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the SmartSens
|
||
|
|
SC4336 camera.
|
||
|
|
|
||
|
|
config VIDEO_SC500AI
|
||
|
|
tristate "SmartSens SC500AI sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC500AI sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC500AI.
|
||
|
|
|
||
|
|
config VIDEO_SC530AI
|
||
|
|
tristate "SmartSens SC530AI sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC530AI sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC530AI.
|
||
|
|
|
||
|
|
config VIDEO_SC5239
|
||
|
|
tristate "SmartSens SC5239 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC5239 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC5239.
|
||
|
|
|
||
|
|
config VIDEO_SC8220
|
||
|
|
tristate "SmartSens SC8220 sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SC8220 sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SC8220.
|
||
|
|
|
||
|
|
config VIDEO_SP250A
|
||
|
|
tristate "Superpix SP250A sensor support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
Support for the SmartSens SP250A sensor.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called SP250A.
|
||
|
|
|
||
|
|
config VIDEO_HYNIX_HI556
|
||
|
|
tristate "Hynix HI556 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Hynix
|
||
|
|
HI556 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called hynix_hi556.
|
||
|
|
|
||
|
|
config VIDEO_HYNIX_HI846
|
||
|
|
tristate "Hynix HI846 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Hynix
|
||
|
|
HI846 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called hynix_hi846.
|
||
|
|
|
||
|
|
config VIDEO_HM5040
|
||
|
|
tristate "Himax HM5040 sensor support"
|
||
|
|
depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select V4L2_FWNODE
|
||
|
|
help
|
||
|
|
This is a Video4Linux2 sensor driver for the Hynix
|
||
|
|
HM5040 camera.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called hm5040.
|
||
|
|
|
||
|
|
comment "Flash devices"
|
||
|
|
|
||
|
|
config VIDEO_ADP1653
|
||
|
|
tristate "ADP1653 flash support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
---help---
|
||
|
|
This is a driver for the ADP1653 flash controller. It is used for
|
||
|
|
example in Nokia N900.
|
||
|
|
|
||
|
|
config VIDEO_LM3560
|
||
|
|
tristate "LM3560 dual flash driver support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select REGMAP_I2C
|
||
|
|
---help---
|
||
|
|
This is a driver for the lm3560 dual flash controllers. It controls
|
||
|
|
flash, torch LEDs.
|
||
|
|
|
||
|
|
config VIDEO_LM3646
|
||
|
|
tristate "LM3646 dual flash driver support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on MEDIA_CAMERA_SUPPORT
|
||
|
|
select REGMAP_I2C
|
||
|
|
---help---
|
||
|
|
This is a driver for the lm3646 dual flash controllers. It controls
|
||
|
|
flash, torch LEDs.
|
||
|
|
|
||
|
|
config VIDEO_SGM3784
|
||
|
|
tristate "SGM3784 dual flash driver support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
|
||
|
|
depends on VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
This is a driver for the sgm3784 dual flash controllers. It controls
|
||
|
|
flash, torch LEDs.
|
||
|
|
|
||
|
|
comment "Video improvement chips"
|
||
|
|
|
||
|
|
config VIDEO_UPD64031A
|
||
|
|
tristate "NEC Electronics uPD64031A Ghost Reduction"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the NEC Electronics uPD64031A Ghost Reduction
|
||
|
|
video chip. It is most often found in NTSC TV cards made for
|
||
|
|
Japan and is used to reduce the 'ghosting' effect that can
|
||
|
|
be present in analog TV broadcasts.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called upd64031a.
|
||
|
|
|
||
|
|
config VIDEO_UPD64083
|
||
|
|
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
|
||
|
|
separation video chip. It is used to improve the quality of
|
||
|
|
the colors of a composite signal.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called upd64083.
|
||
|
|
|
||
|
|
comment "Audio/Video compression chips"
|
||
|
|
|
||
|
|
config VIDEO_SAA6752HS
|
||
|
|
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select CRC32
|
||
|
|
---help---
|
||
|
|
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
|
||
|
|
audio encoder with multiplexer.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called saa6752hs.
|
||
|
|
|
||
|
|
comment "SDR tuner chips"
|
||
|
|
|
||
|
|
config SDR_MAX2175
|
||
|
|
tristate "Maxim 2175 RF to Bits tuner"
|
||
|
|
depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
|
||
|
|
---help---
|
||
|
|
Support for Maxim 2175 tuner. It is an advanced analog/digital
|
||
|
|
radio receiver with RF-to-Bits front-end designed for SDR solutions.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here; the
|
||
|
|
module will be called max2175.
|
||
|
|
|
||
|
|
comment "Miscellaneous helper chips"
|
||
|
|
|
||
|
|
config VIDEO_THS7303
|
||
|
|
tristate "THS7303/53 Video Amplifier"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
help
|
||
|
|
Support for TI THS7303/53 video amplifier
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called ths7303.
|
||
|
|
|
||
|
|
config VIDEO_M52790
|
||
|
|
tristate "Mitsubishi M52790 A/V switch"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Mitsubishi M52790 A/V switch.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called m52790.
|
||
|
|
|
||
|
|
config VIDEO_I2C
|
||
|
|
tristate "I2C transport video support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
select VIDEOBUF2_VMALLOC
|
||
|
|
imply HWMON
|
||
|
|
---help---
|
||
|
|
Enable the I2C transport video support which supports the
|
||
|
|
following:
|
||
|
|
* Panasonic AMG88xx Grid-Eye Sensors
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called video-i2c
|
||
|
|
|
||
|
|
config VIDEO_NVP6158
|
||
|
|
tristate "NEXTCHIP nvp6158 driver support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the Nextchip NVP6158 multi channels digital decode to
|
||
|
|
BT656/BT1120 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called nvp6158_drv.
|
||
|
|
|
||
|
|
config VIDEO_NVP6188
|
||
|
|
tristate "NEXTCHIP nvp6188 driver support"
|
||
|
|
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
|
||
|
|
help
|
||
|
|
Support for the Nextchip NVP6188 multi channels digital decode to
|
||
|
|
MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called nvp6188.
|
||
|
|
|
||
|
|
config VIDEO_NVP6324
|
||
|
|
tristate "NEXTCHIP nvp6324 driver support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
---help---
|
||
|
|
Support for the NVP6324.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jaguar1_drv.
|
||
|
|
|
||
|
|
config VIDEO_RN6854
|
||
|
|
tristate "RICHNEX rn6854 driver support"
|
||
|
|
depends on VIDEO_V4L2 && I2C
|
||
|
|
help
|
||
|
|
Support for the RICHNEX RN6854 multi channels digital decode to
|
||
|
|
MIPI CSI-2 bridge.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called rn6854.
|
||
|
|
|
||
|
|
config VIDEO_HALL_DC_MOTOR
|
||
|
|
tristate "Hall dc-motor driver for camera iris"
|
||
|
|
depends on PWM && VIDEO_V4L2
|
||
|
|
help
|
||
|
|
This a driver used pwm to drive motor
|
||
|
|
|
||
|
|
config VIDEO_RK_IRCUT
|
||
|
|
tristate "Rockchip IR-CUT control device"
|
||
|
|
depends on VIDEO_V4L2
|
||
|
|
help
|
||
|
|
Support for the Rockchip IR-CUT control board.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called rk_ircut.
|
||
|
|
|
||
|
|
config VIDEO_MP6507
|
||
|
|
tristate "MP6507 motor driver for camera iris/focus/zoom"
|
||
|
|
depends on PWM
|
||
|
|
help
|
||
|
|
This a driver used pwm to drive motor
|
||
|
|
|
||
|
|
endmenu
|
||
|
|
|
||
|
|
menu "Sensors used on soc_camera driver"
|
||
|
|
|
||
|
|
if SOC_CAMERA
|
||
|
|
source "drivers/media/i2c/soc_camera/Kconfig"
|
||
|
|
endif
|
||
|
|
|
||
|
|
endmenu
|
||
|
|
|
||
|
|
endif
|